Robotics Arm • January 31, 2022
What are robotic arms? Robotic arms are machines that are programmed to execute a specific task or job quickly, efficiently, and
extremely accurately. Generally motor-driven, they’re most often used for the rapid, consistent performance
of heavy and/or highly repetitive procedures over extended periods of time, and are especially valued in the
industrial production, manufacturing, machining and…
Keep Reading →
Programmable Logic controller • January 08, 2022
A programmable logic controller (PLC) or programmable controller is an industrial computer that has been
ruggedized and adapted for the control of manufacturing processes, such as assembly lines, machines, robotic
devices, or any activity that requires high reliability, ease of programming, and process fault diagnosis.
Dick Morley is considered as the father of PLC as he had invented the first…
Keep Reading →
ANSI 21 FL Protection • January 04, 2022
The FL function is described through ANSI 21FL, from the normative ANSI C37.2. This function is defined too
through IEC in the normative 60617 as FLOC 68. The function ANSI 21FL is present normally in some
protection divice for the electrical network. It is important remark that the function ANSI 21FL from come ANSI 21, which is the distance fault function
according to ANSI C37.2. The…
Keep Reading →
Electric Heat Tracing in pipeline • December 10, 2021
What is Heat Tracing on Pipeline? Heat tracing is a system consisting of a set of paths that is in physical contact with the pipe or vessel.
They consist of a resistive element that heats up when electricity is made to pass through it. Oil and gas
industries make use of heat tracing systems on a wide scale. The main application of a heat tracing system is to maintain the temperature at the desired…
Keep Reading →
Device avaliable to install and improve the power quality • November 26, 2021
Why power Correction? Power factor correction (PFC) aims to improve power factor, and therefore power quality. It reduces the load
on the electrical distribution system, increases energy efficiency and reduces electricity costs. It also
decreases the likelihood of instability and failure of equipment. There are devices that perform functions
such as the elimination of noise, change, or…
Keep Reading →
Earting System, Low and medium Voltage • November 15, 2021
In balanced operating conditions these three voltages are phase shifted by 120° and have the value: U / (3)1/2
U being the phase-to-phase voltage measured between phases. From a physical point of view, the neutral is the common point of three star-connected windings. It may
or may not be accessible, may or may not be distributed and may or may not be earthed, which is why we
refer to the earthing…
Keep Reading →